| Classifications |
Specifications & Properties |
Note |
| Structure |
Cement filling inside the upper and lower parts |
- |
| Panel Depth |
35±0.5mm |
|
| Panel Size |
600X600±0.5mm |
|
| Panel Material |
Upper layer plate:1.0TX596X596
Down layer plate:1.0TX670X670 |
KS D 3512 Cold Rolling Coil |
| Panel Weight |
16Kg/piece below |
|
| Panel Paint |
Partial Electrostatic Painting |
|
| Filler |
blast-furnace slag cement |
Environmental Friendly |
| centralized load |
Bending, 40mm or below |
When 500Kgf is forced |
| Finishing Materials |
THK:1.2, 2.0, 3.0 |
Deluxe , Conductivity, HPL |
| EDGE TRIM |
3.0TX5.0WX595L |
P.V.C |
| Form of support fixture |
Independent Pedestal & Stringer clamping |
|
| Frame |
Stringer |
1.0TX25X22X550 |
KSD 3512 + Galvanizing |
support fixture
(Anti-corrosive
Coating required) |
Head Plate |
2.0TX100X100 |
KSD 3512 + Galvanizing |
| Head Bolt |
Threaded part:3/4"(19Ø)xL |
KSB 1002 Structural Metal Bolt |
| Head Nut |
3/4"(19Ø)xL |
KSB 1012 Structural Metal Nut |
| Pedestal Base |
2.0Tx100x100 |
KSD 3501 Galvanized-steel |
| Pedestal Pipe |
1.4TxØ22xL |
Carbon Steel pipe for general structures |
